Gamepad Controller Emulator

In order to edit this wiki, you must register and verify your account.

You can set up your Controller in the menu Options -> Input settings. You can add up to eight controllers to the emulator.

• Sep 10, 2016 'Gamepad connected' on emulator websites. Unsolved I'm testing out a Bluetooth controller on some emulator websites like playemulator and arcadestop, but a notification appears saying 'Gamepad connected' every time I push a button, and I can't seem to turn it off.
• The main controller configuration window will appear, as seen in the screenshot below. In the Gamecube Controllers config area, you can configure or disable the emulated GameCube controller ports. The emulated GameCube controllers themselves are referred to as 'Standard Controller.
• Gamepad Emulator Compatibility Guidelines If your gamepad control mechanism is affected by any of the following limitations, your game is probably a poor candidate for using gamepad emulation. Instead of emulation, consider creating a new control scheme for Touch controllers to provide a.

The following emulators all work with the Steam Controller out of the box, allow full customisation of both Gamepad and KBM inputs, and work with the Steam Overlay (I haven't tested the multi-platform emulators myself, I'm told they work fine, but let me know if not). RetroArch www.libretro.com (Multi); Mednafen mednafen.fobby.net (Multi); Higan byuu.org (Multi). WoJ XInput Emulator Play any PC game, that supports only XInput, with your DirectInput gamepad, flight-stick or wheel.

• 1Emulated hardware
• 2Supported input devices

Emulated hardware

Wii U Gamepad

Wii U Pro Controller

Wii U Classic Controller

Supported input devices

Keyboard

Xbox 360 Controller (USB)

Setting up the xBox 360 Controller (same for both wireless and wired via USB)

Open up Cemu, head to the Input section, select 'Emulated Device' either as WiiU GamePad (recommended) or the WiiU Pro Controller.

Next up select 'Controller API' as Xinput and then select your controller in the drop down menu (most likely it will show up as 'Controller 1' unless you got more connected.

After that you can click the gray area next to the 'A' button and start mapping your controller as you like. It will automatically jump to the next input for you.Once this is done you can hit 'X' in the top right corner and you're pretty much ready to go!

Here's an example of how to map the controller (I followed the actual buttons on my xBox controller and not how the actual WiiU GamePad looks like)

Official Wii Controllers

Motion Data

Refer to the Motion Controls page for several solutions involving providing motion data to Cemu.

In this section we'll be configuring controller inputs for Cemu, and setting up motion controls.

This can vary between controllers, as some controllers do support motion controls (e.g. Switch and Playstation), however some don't (e.g. Xbox controllers).

If you have a generic controller, it may possibly simply emulate an Xbox controller. Try following the Xbox guide. If that doesn't work, try again but with the controller API set to DirectInput instead.

Magic bullet looks 2.0 mac. Magic bullet looks 2.0 free download. Design & Photo downloads - Magic Bullet Looks by RedGiantSoftware and many more programs are available for instant and free download. Thank you for downloading Magic Bullet PhotoLooks for Mac from our software portal The application is licensed as shareware. Please bear in mind that the use of the software might be restricted in terms of time or functionality. The version of the Mac application you are about to download is 2.0.2. Magic Bullet Looks is the most intuitive color finishing tool on the market today. Get in, choose a preset look, tweak it a bit, and get on with your workflow. Or create your look entirely from scratch, with powerful, flexible tools in a user interface built for design.

Please select your controller type below:

Downloads

• The latest release of BetterJoy
• The latest release of Cemuhook
  • If you installed Cemuhook earlier, you don't need to download this

Installing Cemuhook

1. Extract the contents of the Cemuhook .zip file to the Cemu directory
2. Open the Cemu application
3. In the bottom-right-hand corner, it should say Cemu plugin x.x.x.x by rajkosto
   • This means Cemuhook has been successfully installed
   • If doesn't say this, ensure that your Cemu directory looks like this:

Installing Drivers

1. Extract the BetterJoy .zip file to a folder
2. Open the folder and then open the Drivers folder
3. Run and install ViGEmBus_Setup
4. Enter the HIDGuardian folder
5. Right click the HIDGuardian Install (Run as Admin) file
6. Click 'Run as Administrator'
   • Administrator privileges are required for this
7. When prompted, allow the script to run in administrator mode
8. Wait for the driver install to be complete
9. You may need to restart once this is done

Instructions

1. Connect your Joy-cons or Switch Pro controller to Windows via Bluetooth
   • You will need to connect both joy-cons separately if you are using two
2. Open the BetterJoy application
3. Your controller(s) should appear connected
4. Open the Cemu application
5. On the top bar, go to Settings -> Input settings
6. Change Emulate controller to Wii U Gamepad
7. Change Controller API to XInput
8. Change Controller to Controller X
9. Proceed to map all your controller button inputs
10. At the top, enter in a controller profile name, e.g. Switch Controller
11. Click Save
12. Exit the Input Settings

Motion Controls

1. On the top bar, go to Settings -> Gamepad Motion Source
2. Select your controller from this list
3. Select By slot

Downloads

Keyboard To Gamepad Emulator

• The latest release of DS4Windows
• The latest release of Cemuhook
  • If you installed Cemuhook earlier, you don't need to download this

Instructions

Gamepad Controller Emulator For Pc

1. Download and extract DS4Windows to your computer
   • Select the _x64.zip file
2. Connect your DualShock 4 or DualSense controller to Windows via USB or Bluetooth
   • Motion controls with the DualSense currently only supports USB connections
3. Open the DS4Windows application
4. Ensure your controller is registered with DS4Windows
5. Navigate to the Settings tab
6. Enable UDP Server
   • This should say 127.0.0.1 with port 26760
7. Open the Cemu application
8. On the top bar, go to Settings -> Input settings
9. Change Emulate controller to Wii U Gamepad
10. Change Controller API to XInput
11. Change Controller to Controller X
12. Proceed to map all your controller button inputs
13. At the top, enter in a controller profile name, e.g. DS4 Controller
14. Click Save

Gamepad

Motion Controls

1. On the top bar, go to Settings -> Gamepad Motion Source
2. Select your controller from this list
3. Select By slot

Instructions

Motion controls are not available for Xbox controllers, making some features in games, such as shrine puzzles in Breath of the Wild, hard to use.

1. Connect your Xbox controller to Windows
2. Open the Cemu application
3. On the top bar, go to Settings -> Input settings
4. Change Emulate controller to Wii U Gamepad
5. Change Controller API to XInput
6. Change Controller to Controller X
7. Proceed to map all your controller button inputs
8. At the top, enter in a controller profile name, e.g. Xbox Controller
9. Click Save

Motion controls can be fully supported by a variety of other devices, including:

• Android/iOS/Windows Phone devices with a gyroscope
  • CemuNoGyro with Web Server: (Click Here)
  • MotionSource App & Web Server: (Click Here)
• MotionPlus WiiMotes
  • Should be supported natively by Cemu
  • Alternatively, WiimoteHook
• Steam Controllers
  • Steam Gyro Information

Other limited solutions include:

• Dualshock 3 controllers
  • May not be as accurate or responsive as DS4 controllers.
  • Covered by Cemuhook's webpage: (Click Here)
• Emulate Motion Axes using Controller Analog Sticks
  • CemuNoGyro Information
• Right-clicking within Cemu's window while a Gamepad is set as the current emulated controller.
  • If an alternative controller is being emulated, you may open the Separate Gamepad View to do the same.

Failing that, you might be able to get by with:

• Non-MotionPlus WiiMotes
• Android/iOS devices with a magnetometer
• Android/iOS devices with only an accelerometer

You can view how to use and install most of these on the Cemu Wiki or Cemuhook Motion Instructions webpages.

Your Cemu set-up should now be complete, but there's one thing we're missing here – games.

The next section of the guide will take you through how to 'dump' (copy) your games, updates, saves and more over from your Wii U to your PC.

Gamepad Emulator Download

Continue to Dumping Games.